Texas Foundries Ltd. dba Citation Lufkin LARGE GREY AND DUCTILE IRON DISA FOUNDRY LIQUIDATION |
|||
| 1- | Laempe Cold Box Core Machine Model G-2 C-1, #806 (New 1993), Equipped with Laempe Model SMG1.5 Core Sand Mixer, Hydraulic System, Enclosure and Controls | ||
| 1- | Laempe Cold Box Core Machine Model G-2 C-1, #805 (New 1992), Equipped Laempe Model SMG1.5 Core Sand Mixer, with Hydraulic System, Enclosure and Controls | ||
| 1- | Laempe Cold Box Core Machine Model G-3 C-1, #865 (New 1993), Equipped Laempe Model SMG1.5 Core Sand Mixer, with Hydraulic System, Enclosure and Controls | ||
| 1- | Laempe Cold Box Core Machine Model G-3 C-1, #861 (New 1993), Equipped Laempe Model SMG1.5 Core Sand Mixer, with Hydraulic System, Enclosure and Controls | ||
| Lot- | 3-Hankinson Air Drier Model 80170, S/N 0332A-1-9210-91, 033A-1-9210-91 & N/A, Capacity 170SCFM @ 100-psi | ||
| Lot- | Approx. 700 Wire Baskets 38 x 46 x 30 Deep Stacking, with Drop Sides | ||
| 6- | Gaylord Model 24 VSTB Cold Box Core Machines, Each Equipped with Gaylord LCC G75 Gas Generator and Allen Bradley Panel View 550 Panel View Controls | ||
| 3- | Kloster 200-Lb./Min. High Speed Mixers, S/N 7879, 7796 and N/A, Each with Castec Low Profile 45-KW Sand Heater and Controls, Powder Feeder and PLC Controls | ||
| 1- | Kloster Shuttle Car System, (2) Cars, with Auto Controls and 18" x 12' Belt Conveyor | ||
| 1- | Disa Combie Core Cell Cold Box Core Machine Type HAFRS, S/N 0200-30 (New 1998), with Kloster 200-Lb. /Min. Mixer, S/N MS7945, Powder Feeder, Castec Electric Sand Heater, (2) Sahara Air Tank Driers Model EP1540 MAWP, 150-psi @ 450OF, Coffing 2-Ton Chain Hoist, with Pendant Control | ||
20 |
TIP UP CORE RACKS | ||
| 3- | Ferrodyne Ace Shell Core Machines 6-J,6-A, 6-H, S/N's AU4012695C, Each with Sand Feed | ||
| 1- | Inductotherm Model 4500 Line Frequency Coreless Induction Melting Furnace System, Equipped with 3,500-KW Power Supply, 15-Ton Furnace, Steel Shell Furnace, with Lid, Interconnecting Cables and Buss, Common Water and Hydraulic Systems, Unit #5 | ||
| 2- | Inductotherm Coreless Induction Melting System, Each Equipped with (2) Steel Shell 15-Ton Furnaces, (2) 7,500-KW Power Supplies, Control Panels, Medium Frequency Hydraulic Systems, with Water Systems, Unit # 4&2 | ||
| 2- | ABB Coreless Induction Melting System, Each Equipped with (2) Steel Shell 12-Ton Furnaces,(2) 7,000-KW Power Supplies, Control Panels, Medium Frequency Hydraulic Systems, Water Systems, Units 6 and 7, Including Home Made Scrap Drying System Supplying All Furnaces | ||
| 1- | Hot Metal Transport System (Over Head Cab Rider) Manufactured by Crane Man, with (6) Whiting Bull Ladles, 9-Modern Inoculation Ladles | ||
| 2- | Inductotherm Linemelt Horizontal Drum Holding Furnaces, Each Equipped with 40-Tons, 600-KW Power Supply Single Phase, Unit # A and B, with Hydraulic System, Controls, Water System | ||
| 1- | ABB Model IRT-100 Vertical Channel Holding Furnace, 60-Ton Capacity, 1,000-KW Power Supply, S/N J4037 (New 1995), with Hydraulic System, Water System, Unit C | ||
| 4- | Concrete Sand Silos, 14'Dia. x 40' H, with (2) NOL-TEC Sand Transporters, Controls | ||
| 1- | Disa Model 2013 MK-5 B Automatic Molding Machine, S/N DMM-93.2537 (New 1993), Equipped with Auto Core Setter, AMC Conveyor, 172.5' SBC Conveyor, with Drive, Selcom Laser Auto Pour System | ||
| 1- | Disa 2013 MK-5 B Automatic Molding Machine, S/N DMM-94.2545 (New 1994), Equipped with Auto Core Setter, AMC Conveyor, 172.5' SBC Conveyor, with Drive, Selcom Laser Auto Pour | ||
| 1- | Disa 2013 MK-5 B Automatic Molding Machine, S/N DMM-95.2551 (New 1995), Equipped with Auto Core Setter, AMC Conveyor, 172.5 SBC Conveyor, with Drive, Selcom Laser Auto Pour | ||
| 1- | Disa 2013 MK-5 B Automatic Molding Machine, S/N 130049 (New 2000), Equipped with Auto Core Setter, AMC Conveyor, 172.5 SBC Conveyor, with Drive, Selcom Laser Auto Pour | ||
| 1- | Simpson 23G Continuous Sand Muller Model 23G-200, S/N E990-7002 (New 1999), with Hartley Compatibility Controls, Model 17MK-2 Series 2502/2552, Dust Hood, Bond Silo, Transporter, Controls | ||
| 2- | B&P 100B Sand Mullers, S/N's 100B-450-9310, Units A and B, 200-HP Motors. Each Equipped with Hartley Compatibility Controls, Dust Hood, Batch Hopper, Bond Silos, Transporter, Controls | ||
| 1- | B&P 100B Sand Muller Model HD250 Heavy Duty 250-HP Motor, Equipped with Hartley Compatibility Controls, Dust Hood, Batch Hopper, Controls | ||
| 1- | B&P 100B Sand Muller Model HD250 Heavy Duty 250-HP Motor, Equipped with Hartley Compatibility Controls | ||
| 1- | Didion MD-200, S/N DM-400 (New 1994), Rotary Media Drum Shake Out, Equipped with Drive | ||
| 1- | Didion MD-200, S/N N/A, Rotary Media Drum Shake Out Equipped, with Drive | ||
| 1- | Wheelabrator 34 Cu. Ft. Super III Tumblast Cleaning Machine, S/N A-140061 (New 1995), Equipped with Floor Loader, Discharge Oscillating Conveyor, with Drive | ||
| 1- | Wheelabrator 28 Cu. Ft. Super II Tumblast Cleaning Machine, S/N A-136546 (New 1985), Equipped with Floor Loader, Discharge Oscillating Conveyor, Upgraded to Double Wheel 2001 | ||
| 1- | Wheelabrator 28 Cu. Ft. Super II Tumblast Cleaning Machine, S/N A-132716 (New 1991), Equipped with Floor Loader and Unloader | ||
| 1- | Wheelabrator 28 Cu. Ft. Super III Tumblast Cleaning Machine, S/N A-140386 (New 1995), Equipped with Floor Loader and Unloader | ||
| 1- | Wheelabrator 34 Cu Ft. Super III Tumblast Cleaning Machine, S/N A-141345 (New 1996), Equipped with Floor Loader and Unloader | ||
| 1- | Wheelabrator 7 Cu Ft. Super Tumblast Cleaning Machine, S/N A-109960, Sample Machine, with New Panel View Controls | ||
| 1- | 2001CSI Sprue Crusher Model 60X60, S/N CC140 | ||
| Lot- | Approx. 500 Drop Bottom Boxes, 41" x 46" x 22" Deep | ||
| 1- | Custom Design & Fabricated Chill Press DAKE 150 TON | ||
| 1- | Max Vac Vacuum Model R40E, S/N N166, 40-HP | ||
| CASTING HANDLING | |||
| Lot- | Lot of Various Oscillating Conveyors, Throughout the Facility, Including But Not Limited to: | ||
| GK Syncro Coil Oscillating Conveyor Model SCRT 33:30, S/N C-7472-3, with Drive | |||
| GK Paramount Feeder Model 40/48X10, S/N C-8737-1A, with Drive | |||
| GK Model TWF 40X48X13 Oscillating Conveyor, S/N C-8737-2, with Drive | |||
| GK Vibratory Conveyor Model SCRT 42/54X12X17, S/N C-8737-4, with Drive | |||
| GK Vibratory Conveyor Model SCRT 54/66 x 12 x 54.5, S/N C-8737-6, with Drive | |||
| GK Desprueing and Sorting Conveyor Model SCRT 36/48X6X25.0, S/N C-8737-8, with Drive | |||
| GK Charge Make Up Feeder Model FRC 42/72X43.00, S/N C-7939-2, with Drive | |||
| GK Inclined Pan Conveyor Model SCRT 54 x 36" x 54.5", S/N C8237-6 | |||
| GK Pan Conveyor Model SCRT 48/00 x 18', S/N C8737-5 | |||
| GK Pan Conveyor 60W x 18'L | |||
| GK Pan Conveyor 60W x 7'L | |||
| GK Vibratory Conveyor Model SCRL 36/48X12X39.5, S/N C-8737-3, with Drive | |||
| GK Vibratory Conveyor Model SCRT 48/60 x 12 x 17, S/N C-8737-5 | |||
| GK Para-Mount II De-Accumulating Conveyor Model FRC 36/48X12X7.25, S/N C-8737-7, with Drive | |||
| GK Vibratory Feeder Model FRC 42/72X21.25, S/N C-7639-1, with Drive | |||
| GK Balanced Conveyor Model SCRL 48/60X30X46.37D, S/N C-7639-3, with Drive | |||
| GK Balance Charge Conveyor Model SCRL 54/78x30x25.33C, S/N C-7639-4, with Drive | |||
| GK Furnace Charge System, S/N C-7639-6, with Drive | |||
| GK Bad Mold Conveyor Model Upper Trough | |||
| Gk Didion Feed Conveyor Model SCRT 36/48X12X54.33, S/N C-7467-3, with Drive | |||
| GK Sand Return Conveyor Model SCRL 48/66x12x16.0, S/N C-7467-5, with Drive | |||
| GK Pan Conveyor Model SC60.81.3, S/N C3889-5 | |||
| GK Fluid Bed Cooler Model SCSC 60X36X30.0, S/N C-7467-7, Equipped with Drive, Blower, Motor and Controls | |||
| GK De-Accumulating Conveyor Model SCRT 36/48X6X18.33, S/N C-7467-9 | |||
| GK Furnace Charge Feeder Model FRC 36/72X30.0, S/N C-7639-5, with Drive | |||
| GK Mold Dump Conveyor Model SCRT 38/48X15X44, S/N C-7467-1, with Drive | |||
| SCRT 36/48X12X45.0 Model Lower Trough SCRT 24/38x10x48.0, S/N C-7467-2, with Drive | |||
| GK Spill Sand Conveyor Model SFS 12/19X4X35.0, S/N C-7467-4, with Drive | |||
| GK Moisture Addition System, S/N C-7467-6 | |||
| GK Casting Cooling Conveyor Model SCRT 60/72X12X41.19, 60/72X12X9, 60/72X12X25.42, S/N C-7467-8, with Drive | |||
| Simpson Model MC300 Multi Cooler Model MC300-102 | |||
| GK Desprueing Conveyor Model SCRT 36/48 X3X40.0, S/N C-7467-10, with Drive | |||
| GK Pan Conveyor Model SC 36/40X82.5, S/N C-1929-1, with Drive | |||
| GK Conveyor Model SC 36/42X50, S/N C-1948-1, with Drive | |||
| GK Finishing Pan Model ARP 36/5.6, S/N C-2075-1, with Drive | |||
| GK Melt Charge Model SC 30/52X33, S/N C-2509-1, with Drive | |||
| GK Screen Model FRP 60X13.5, S/N C-3601-1, with Drive | |||
| GK Accumulator Model SC 48X94, S/N C-3602-4, with Drive | |||
| GK Sprue Conveyor Model PMII 36X43.4, S/N C3602-6, with Drive | |||
| GK Charge Feeder Model TM 48/89X14.5, S/N C-3824-1B, with Drive | |||
| GK Sorting Conveyor SCRT 26/36X5, S/N C-7472-2, with Drive | |||
| GK Cross Conveyor Model SC 36/42X50, S/N C-1947-1, with Drive | |||
| GK Conveyor Model TWHF 42X25, S/N C-1949, with Drive | |||
| GK Spill Sand Conveyor Model SF 18X20, S/N C-2313-1, with Drive | |||
| GK Sprue Feeder Model ARP 36X10, S/N C-2732-1, with Drive | |||
| GK Accumulating Conveyor Model SC 48X151, S/N C-3602-2, with Drive | |||
| GK De accumulator Model ARC 48X13, S/N C-3602-5, with Drive | |||
| GK Pan Conveyor Model 36WX40L, S/N C-3134-1, with Drive | |||
| Lot- Dust Collection Systems, Throughout the Facility, Including But Not limited to: | |||
| GK Charge Feeder Model TM 48/89 X14.5, S/N C-3824-1A, with Drive | |||
| GK Melt Charge Feeder Model TM 48/84X36X11, S/N C-5262-B, with Drive | |||
| Continued | |||
| Continued | |||
| GK Melt Charge Feeder Model TM 48/84X36X11, S/N C-5262-A, with Drive | |||
| GK Melt Charge Feeder Model TM 48/84X36X11, S/N C-5262-C, with Drive | |||
| 1995 Wheelabrator Dust Collector 140,000-ACFM, Size 3917TA Model 168 Series 6P Top Access Jet III, S/N 3774, Equipped with Blower, Motor and Controls | |||
| Wheelabrator Dust Collector 25,000-ACFM Size 1715 RA Model 120 Series 6P Single Module Roof Access, S/N 3108, Equipped with Blower, Motor and Controls | |||
| Wheelabrator Dust Collector 140,000-ACFM Size, 3917 Model 168 Series 6P Top Access Jet III Fabric Filter, S/N 3759, Equipped with Blower, Motor and Controls | |||
| F 120,000 175,000 | |||
| Lot- Hoists Throughout the Facility, Each with Bridge or Jib Systems, Including But Not Limited to: | |||
| 1993 Wheelabrator Dust Collector 100,000-CFM, Size 3615 TA Model 120 Series 6P Top Access Jet III, S/N 3691, Equipped with Blower, Motor and Controls | |||
| 1995 Wheelabrator Dust Collector 30,000-ACFM, Size 515WCC Model 36, S/N 20-3589, Equipped with Blower, Motor and Controls | |||
| Torit Dust Collector Cartridge Type Equipped 96 Cartridges, Blower, Motor and Controls | |||
| Approx. 20½-Ton ARO and Yale Air Hoist, with Pendent Controls | |||
| Approx. 15, 2-Ton ARO and Yale Air Hoist, with Pendent Controls | |||
| Approx. 75-Ton Electric Hoist, with Pendent Controls | |||
| Approx. 20-Ton ARO and Yale Air Hoist, with Pendent Controls | |||
| Approx 53-Ton Electric Hoist, with Pendent Controls | |||
| 10-Ton Yard Bridge Crane, Equipped with Magnet | |||
| F 40,000 60,000 | |||
| PATTERN SHOP | |||
| 1- | |||
| 1- | South Bend Model CL198-E, 16 x 60" Engine Lathe, S/N N/A, 1½" Hole Through Center, Equipped with 3-Jaw Chuck | ||
| RONG FU | |||
| CHIN HUNG | |||
| 1- | Wodkin Model JV507, 32" Double End Grinder, S/N 63537, Equipped with Base | ||
| 1- | Powermatic Model 81, 20" Woodworking Band Saw, S/N 7881179 (New 1978), 24" x 24" Table | ||
| 1- | Crescent Model 32, 31" Tilt Table Woodworking Band Saw, 28" x 24" Bed, Equipped with 3½-HP Motor | ||
| 1- | Bridgeport Series 1, 2-HP Vertical Tracing Mill, S/N's 109092 and 109091 (New 1967), 11" x 58" Power Feed Table, Twin 2-HP Spindle Motors, True-Trace Model 1115 Tracing Head, S/N N/A, Equipped with Bridgeport Model Con-Trol Scan, Acu-Rite 4-Axis Digital Readout, and Coolant System | ||
| 1- | Kingston Vertical Milling Machine, S/N N/A, 9" x 42" Power Feed Table, 2-HP Variable Speed Drive, 500-4,200-RPM Spindle Speeds, Equipped with Acu-Rite Multi-Axis Digital Readout | ||
| 1- | Supermax Vertical Milling Machine, S/N 85-01163 (New 1985), 9" x 42" Power Feed Table, Equipped with Acu-Rite Multi-Axis Digital Readout | ||
| 2 | EKSTROM - Carlson Model 540 Belt Driven Vertical Mills, Each 18" x 48" Bed | ||
| 1- | Rockwell Delta Bench Type Drill Press, Equipped with 1-HP Motor and 36" Wide x 18" Long Table | ||
| 1- | Delta Rockwell 20" Vertical Band Saw | ||
| 2- | Kindt - Collins Model B Woodworking Disc Sanders, S/N's 5615 and N/A, 24" Dia. Belt | ||
| 2- | Rol-Lift 2,000-Lb. Electric Die Lifts, S/N's 64692 and N/A, Each 67" Lift Height | ||
| 1- | Blanchard Model 22 Rotary Surface Grinder, S/N 11717 (New 1965), Equipped with 42" Dia. Magnetic Base | ||
| 1- | J.A. Fay Jointer, S/N 20407, 24" Blade, 24" x 58" Bed, Equipped with Estimated 3-HP Motor | ||
| 1- | Rockwell Model S-63, 25" Planer, S/N F710381 | ||
| 1- | Giddings & Lewis Model # 25T Horizontal Boring Mill, S/N N/A, 15 - 400 RPM Spindle Speeds, 24" x 50" T-Slotted Table, Equipped with 7½-HP Motor | ||
| 1- | Harig - Bridgeport Model EZ-SURF 618, 6" x 18" Automatic Surface Grinder, S/N 267EZ (New 1998), 6" Dia. x ½" Wide Wheel, Equipped with Bridgeport CNC Controls | ||
| 1- | Caser Model F-55-1250, 52" x 14" Radial Arm Drill, S/N 402, 35 - 2,040 RPM Spindle Speeds, 1/8" - 2-5/8" Dia. Drills, Equipped with 28" x 28" Base and Estimated 7-HP Motor | ||
| 1- | Aremco Model 2928B, 9" Wide x 13" Long x 17" Deep Laboratory Oven, S/N 1-27-99 (New 1999), 350-Volt, 15-Amp, 2,500oF Max. Temperature | ||
| 1- | Lincoln Model Idealarc TM-300/300, AC/DC Welding Power Source, S/N AC-257446, 90-Amp at 45% Duty Cycle, Equipped with Miller Model HF-251D-1 Frequency Starter | ||
| 1- | Cross Bench Top Electric Furnace, S/N 0707 | ||
| 1- | Mini-Blast Model PT-110 Carbon Dioxide Blaster, S/N N/A | ||
| 1- | Marvel 16" x 20" Universal Band Saw, S/N N/A, 1" Blade | ||
| Lot- | Miscellaneous Equipment, Consisting of: Metal Work Benches, Welded Steel Shelving, Bench Grinders, Floor Fans, Table Vises, 1-Ton Electric Hoists, Wesco Lift Carts, Etc. | ||
| 1- | Micro Cut Model 1654 Vertical Mill, S/N 961230 | ||
| METAL AND SAND LABORATORY | |||
| 1- | ELTRA Model 800 Carbon Sulfur Determinater, S/N N/A | ||
| 3- | Buehler Model Supermet Horizontal Sample Polishers, Each Equipped with Single 12" Dia. Polishing Head | ||
| 1- | Thermo Jarrell Ash Model Atom Comp 81 Spectrometer, S/N 48863 (New 1986), Equipped with Computer Interface | ||
| 1- | Baird Model Spectrovac 100 Spectrometer, S/N N/A (New 1990), Equipped with Computer Interface | ||
| Lot- | Sand Laboratory Equipment, Consisting of: Simpson Testers, Sand Strength Testers, Digital Absolute Perimeter Tester, Shot Screen, Clay Wash, Branson Ultrasonic Cleaners, Stirrers, Laboratory Balance, Manufacturer Unknown Laboratory Furnaces, Drill Press, Band Saw, Double End Bench Grinder, Scales, Etc. | ||
| 1- | Nardini Model Fast Trace, 17" x 40" CNC Lathe, S/N D5JEV043 (Estimated New 1998), 75-3,000-RPM Spindle Speeds, 2" Spindle Bore, Equipped with GE Fanuc Series 20-T Controls | ||
| 1- | Wellsaw Model 1016 Horizontal Band Saw, S/N 3064, 1" Blade, Equipped with 2-HP Motor | ||
| 1- | JET | ||
| 1- | Wilson Model J Hardness Tester, S/N 94438 | ||
| 1- | Satec Tensile Tester | ||
| 1- | Satec Tensile Tester Model 60HV, 60,000-Lb. Tensile Tester, S/N 60HV-1081 | ||
| 1- | Olympus Model PME-3 Light Microscope | ||
| 1- | Buehler Model Versamet Metallograph Microscope, Equipped with Automatic Exposure Meter and 19" Computer Monitor | ||
| 1- | Uniden Light Microscope | ||
| 1- | Buehler Model Tech-Met, 8" Dia. Sample Polisher, Equipped with Cabinet | ||
| Lot- | Calibration Instruments, Located Throughout Plant, Consisting of: Digital Calipers, Test Block Sets, Dial Indicators, Weigh Scales, Micrometers, Sieves Depth Gauges, Pin Gauges, Bench Scales, Etc. | ||
| MAINTENANCE SHOP | |||
| 1- | Northfield Model 36 Woodworking Band Saw, S/N 45702-C, ½" Blade, Equipped with 30" x 36" Table and 3-HP Motor | ||
| 1- | Wilton Model VSG2010 Heavy Duty Drill Press, S/N 412-91 (New 1991), 18" x 24" Table, 1½-HP Motor, 80-1,200 RPM | ||
| Lot- | Shop Support Equipment, Consisting of: Chop Saw, Gas Shop Heaters, Welding Rod Dryers, Double End Grinders, Custom Designed and Fabricated Vertical Press, Torch Sets, Welding Tables, Vises, Ladders, Toro Shop Heater, Welding Equipment, Cable Hoists, Bench Grinders, Drill Presses, Parts Washer, Oven, Press | ||
| 1- | Overhead Traveling Bridge Crane, 20' Wide x 60' Travel, Equipped with (2) Yale 1-Ton Underhung Electric Chain Hoists | ||
| 1- | Miller Model SR-300 Welding Power Source, S/N FA36387 (New 1950), 300-Amp at 60% Duty Cycle | ||
| 1- | Delta Rockwell Model 28-350 Woodworking Band Saw, S/N 1387219 | ||
| 1- | Zip-Cut Abrasive Cutoff Saw, 20" Dia. Blade | ||
| 1- | Miller Model Bobcat 250 Welding Generator, S/N KK287597 (New 1999), 225-Amp at 100% Duty Cycle, Equipped with Kohler 16-HP Gasoline Engine | ||
| 1- | Cub Cadet Model Heavy Duty GT-2544 Shaft Drive Lawn Mower | ||
| 1- | 135 | ||
| Clark Model CK-30 LP Gas Tug, S/N CKF-1894170, | |||
| 2- | 138, N/A | ||
| Clark Model CK-30 LP Gas Tugs, S/N's CKF-3750 and N/A | |||
| 1- | Lincoln Model SA-200-F-163, 220-Amp Welding Generator, S/N A944588 (New 1988), 4-Cylinder Gasoline Engine, Mounted on Single Axle Trailer | ||
| 3- | Lincoln Model SA-200-F-163, 220-Amp Welding Generators, S/N's G818709, G878049, and N/A, Each 4-Cylinder Gasoline Engine, Mounted on Single Axle Trailer | ||
| 1- | Manufacturer Unknown 100-Ton H-Frame Press, 48" Between Centers | ||
| 1- | Lincoln Model SAE-400 Welding Generator, S/N U1950416273 (New 1995), 400-Amp at 100% Duty Cycle, Trailer Mounted, Equipped with Diesel Engine | ||
| 1- | Advanced X-Ray Model AXI450, 9' Wide x 12' Long X-Ray Cabinet, S/N TF001 (New 2002), 450-KV Max., 10-MA Max., Equipped with 4,500-KW X-Ray Generator, Advanced 5-Axis Manipulator, and Operator Console | ||
| COMPRESSOR ROOM | |||
| 1- | Ingersoll-Rand Model SSR-EPE350-2S, 350-HP Rotary Screw Air Compressor, S/N EE1965U00116 (New 2000), 125-psig, 1,750-scfm | ||
| 1- | Ingersoll-Rand Model SSR-EPE350-2S, 350-HP Rotary Screw Air Compressor, S/N EE1266U95311 (New 1995), 125-psig, 1,750-scfm | ||
| 1- | Ingersoll-Rand Model SSR-EPE350-2S, 350-HP Rotary Screw Air Compressor, S/N EE2079U01026 (New 2001), 125-psig, 1,750-scfm | ||
| 1- | Ingersoll-Rand Model SSR-EPE350-2S, 350-HP Rotary Screw Air Compressor, S/N EE1115U943416 (New 1994), 125-psig, 1,750-scfm | ||
| 1- | Ingersoll-Rand Model SSR-EPE350-2S, 350-HP Rotary Screw Air Compressor, S/N EE1634U98072 (New 1998), 125-psig, 1,750-scfm | ||
| 1- | Ingersoll-Rand Model SSR-EPE350-2S, 350-HP Rotary Screw Air Compressor, S/N EE2246U02101 (New 2002), 125-psig, 1,750-scfm | ||
| 1- | Ingersoll-Rand Model B79995, 24" x 14" Twin Piston Air Compressor, S/N JH6643, 10" Stroke, 125-psi | ||
| 1- | Sullair Model 900DTQ-CAT Diesel Rotary Screw Mobile Air Compressor, S/N 004-99805BHI, Cat 6-Cylinder Diesel Engine, 125-psi, 1,750-scfm | ||
| 1- | Hankinson Model H-1010 Compressed Air Chiller / Dryer, S/N H1536884001001 (Reported New 1996), R22 Refrigerant, 14,250-scfm at 120-psig | ||
| FINISHING DEPARTMENT | |||
| 8- | Fox Model 320-53S Double End Snag Grinders, S/N's N/A, Each 16" Dia. Wheel, Estimated 5-HP Drive Motor, Equipped with Volks Dust Collector and Dump Pan Stand | ||
| 12- | Fox Model 230S3 Single Wheel Snag Grinder, S/N 8663136 (New 1975), 24" Dia. x 3" Thick Wheel, 10-HP Drive Motor, Equipped with Volks Dust Collector and Dump Pan Stand | ||
| #1 | |||
| 1- | Greenerd Model HCA-100-42R10, 100-Ton Gap Frame Hydraulic Press, S/N 98T5473 (New 1998), 18" Stroke, 30" Daylight, 13" Throat, 9" Bolster, 6" Ram Dia., 34" x 20" Tool Plate, Equipped with Hydraulic System and Light Curtain, with 4-Position Rotary Table | ||
| #5 | |||
| 1- | Greenerd Model HCA-50-60R8, 50-Ton Gap Frame Hydraulic Press, S/N 96T5205 (New 1997), 18" Stroke, 48" Daylight, 13" Throat, 5" Ram Dia., 36" x 15" Bed, Equipped with Jackson Hydraulic Index Table and Allen Bradley Model Panel View 1000 Controls | ||
| 2- | Rapid Trac Custom Designed and Fabricated 2-Head Parts Handling Robots (New 1995 Est.), Each Equipped with Pneumatic Dumper | ||
| 1- | ABB Model IRB6400M94A, 6-Axis Pedestal Type Part Handling Robot | ||
| #4 | |||
| 1- | Greenerd Model HCA-50-60R8, 50-Ton Gap Frame Hydraulic Press, S/N 96T5115 (New 1996), 18" Stroke, 48" Daylight, 13" Throat, 5" Ram Dia., 36" x 15" Tool Plate, Equipped with Jackson Hydraulic Index Table and Panel Mate Controls | ||
| #9 | |||
| 1- | Neff Model DF100-50M, 100-Ton Gap Frame Hydraulic Press, S/N 11115 (New 1999), 24" Stroke, 42" Daylight, 23" Throat, 10" Dia. Cylinder, Equipped with Allen Bradley Model Panel View 900 Controls | ||
| #10 | |||
| 1- | Neff Model DF100-50M, 100-Ton Gap Frame Hydraulic Press, S/N N/A, 24" Stroke, 42" Daylight, 23" Throat, 10" Dia. Cylinder, Equipped with Allen Bradley Model Panel View 900 Controls | ||
| 1- | Neff Model DF100-50M, 100-Ton Gap Frame Hydraulic Press, S/N N/A, 24" Stroke, 42" Daylight, 23" Throat, 10" Dia. Cylinder, Equipped with Allen Bradley Model Panel View 900 Controls | ||
| #3 | |||
| 1- | Greenerd Model HCA-50-60R8, 50-Ton Gap Frame Hydraulic Press, S/N 95T4983 (New 1995), 18" Stroke, 48" Daylight, 13" Throat, 5" Ram Dia., 36" x 15" Tool Plate, Equipped with 12-Position Rotary Table and Allen Bradley Model Panel View 1000 Controls | ||
| #2 | |||
| 1- | Greenerd Model HCA-100-42R10, 100-Ton Gap Frame Hydraulic Press, S/N 98T5472 (New 1998), 18" Stroke, 30" Daylight, 13" Throat, 9" Bolster, 6" Ram Dia., 34" x 20" Tool Plate, Equipped with 4-Position Rotary Table | ||
| 1- | Vulcan Model ABB-IRF-4400L-2.4/30 Robotic Unloading Control Arm (New 2002), Rated at Single Casting per Cycle, 240-Castings/Hour, 94½" Each, 66-Lb. Weight Capacity, Equipped with ABB Model IP54 Robot Controls, Vision Inspection System, Cell Enclosure, and Light Curtain | ||
| 1- | General Model ARC-48X10, 48" Wide x 12' Long Vibratory Feeder, S/N C-9085-1, Equipped with 20-HP Motor | ||
| 1- | Paramount 48" x 12' Vibratory Feeder | ||
| 2- | 48" Wide x 40' Long Leg Mounted Power Belt Conveyors, Each Equipped with Center Divider | ||
| 4- | Wardcraft 24" Wide x 15' High Cleated Power Incline Conveyors | ||
| 12- | American NDT Model AX-9 Ultrasonic Test Systems, S/N's 1003, 0989, 0992, 0993, 0980, 0979, 0964, 1004, 0994, 0987, 0863, and 0938, Each Equipped with Test Tanks and Allen Bradley Controls | ||
| 5- | American NDT Model AX-10 Ultrasonic Test Systems, S/N's 5001, 1045, 1041, and 1031, Each Equipped with Test Tank and Allen Bradley Controls | ||
| 24- | 48" Wide x 48" Long x 48" Deep Welded Steel Dump Pan Stands, Each Equipped with Incline Slide | ||
| 1- | MagnaFlux Model X-4763 Particle Inspection Machine, S/N 76770 (New 1980's Est.), Equipped with In-Feed and Exit Power Roller Conveyor and Spectroline Model UV400 Light Source | ||
| 2- | Custom Designed and Fabricated Manual Inspection Stations, Each Equipped with 24" Wide x 10' Long Power Belt Conveyor | ||
| Lot- | Support Equipment, Consisting of ARO 2-Ton Electric Chain Hoists, Steel Tables, Storage Cabinets, Tabletop Drill Press, Dead Roll Conveyor, Etc. | ||
| Lot- | Approx. (84) Sections 8' Wide x 34" Deep x 12' High Pallet Racking, Each 3-Tier | ||
| Lot- | Paint Line, Consisting of: | ||
| 3-Stage Curing Oven 7-Stage Pretreat Washing Station, with (1) 800-Gallon Spray Washer, (1) 500-Gallon Spray Washer, (1) 350-Gallon Spray Washer, (1) 4,800-Gallon Immission Bath, (1) 750-Gallon Spray Washer, (1) 350-Gallon Spray Washer, (1) 500-Gallon Spray Washer, (1) 6,000-Gallon Point Immersion Tank | |||
| Post Rinse Station, with (1) 500-Gallon Rinse Tank, (1) 500-Gallon Rinse Tank | |||
| Post Rinse Station, with (1) 500-Gallon Rinse Tank, (1) 500-Gallon Rinse Tank | |||
| Approx. 1,350' of Overhead Conveyor | |||
| 400-AMP RectifierApprox. 1,000 Custom Paint Racks | |||
| FOUNDRY | |||
| 1- | Contax Industries ½-Ton Jib Crane, 10" Dia. x 12' Reach, Equipped with ½-Ton Electric Chain Hoist | ||
| Lot- | Approx. (155) Sections 41" Wide x 52" Deep x 12' High Slide-In Pallet Racking, Each 3-Tier | ||
| 2- | Coffing 2-Ton Pendant Controlled Electric Chain Hoists | ||
| 1- | Lincoln Model AC/DC 225 Welding Power Source, S/N 92251100, 200-Amp at 60% Duty Cycle | ||
| 1- | Kalamazoo Abrasive Cutoff Saw, 12" Dia. Blade, Equipped with 2-HP Motor | ||
| 2- | Lodestar 2-Ton Pendant Controlled Electric Chain Hoists | ||
| 1- | Olympus Model PME3 Light Microscope | ||
| MATERIAL HANDLING | |||
| 12- | Yale Electric Pallet Jacks, S/N's N/A, Each Equipped with Charger | ||
| 3- | Big Joe Model PDC-20-154, 2,000-Lb. Electric High Lift Walkies, S/N's 358128, 350479, and N/A, Each 140" Height Capacity | ||
| 1- | 1988 Capacity Model TJ4000 Diesel Yard Dog, VIN: 17540HR50E1215101, Single Axle, Automatic Transmission | ||
| 1- | Whiting Trackmobile Model 201-76 Diesel Railcar Mover, S/N 74847 (New 1980's Est.), Detroit Diesel Engine | ||
| 1- | Minuteman Model Power Boss LP Gas Floor Sweeper | ||
| 1- | 1978 Ottawa Model 30 Yard Dog, VIN: 52062, Single Axle, Automatic Transmission | ||
| 1- | #45 | ||
| 1988 Mack Model R688ST Tandem Axle Diesel Roll-Off Truck, VIN: 1M2N187Y7JW024349, Cummins Diesel Engine, 9-Speed Transmission, 105,314 Miles Indicated | |||
| 1- | 1991 GMC Model Cheyenne Pick-Up Truck, VIN: 1GCDC14Z9MZ180331, Automatic Transmission, 114,830 Miles Indicated | ||
| Lot- | Miscellaneous MRO to Include but not Limited to the Following: Motors, Sprockets, Bearings, Bushings, Wire, Gearboxes, Conveyor Belts, Hydraulic Cylinder, Seals, Ball Bearings, Blowers, Handles, Fans, Drive Chains, Couplings, Filters, Pipe Fittings, Electric Wire, Electric Cable, Brakes, Clutches, Hardware, Hose, Pulleys, Pipe Connectors, Copper Tubing, PVC Connectors, Welding Supplies, Circuit Boards, Temperature Gauges, Fuses, Switch Boxes, Motor Starters, Limit Switches, Line Starters, Control Buttons, Control Lights, Relay Interfaces, Electrical Connectors, Electrical Fasteners, Conduit Connectors, Transformers, Valves, Electrical Boxes, Etc. | ||
| Lot- | Miscellaneous Plant Support Equipment, Including but not Limited to the Following: Miscellaneous Gauges and Testing Devices, Steel Filing Cabinets, Steel Desks, Hand Trucks, Pallet Jacks, Banding Carts, Flammable Cabinets, Foreman Desks, Pallet Racking, Layout Tables, Work Benches, Vises, Hand Tools, Power Tools, Pneumatic Tools, Retractable Hose Reels, Dock Lights, Tool Holders, Perishable Tooling, Push Carts, Storage Shelves, Etc. | ||
| Lot- | Miscellaneous Business Machines, Office Furniture, and Fixtures Including but not Limited to the Following: Personal Computers, Laptops, Scanners, Printers, Plotters, Routers, Switches, Servers, Cloth Covered Partitions, Desks, Swivel Chairs, Conference Room Furniture, Etc. | ||
| TOP | |||