Bradford Equipment Inc.
UFDY.com
Used Foundry Equipment On-line! |
| FURNACES /OVENS |
Click to enlarge |
REF. |
DESCRIPTION |
EMAIL |
PHOTO |
| (X2P1964) |
ABB FURNACE SYSTEM
FURNACE CONTROL SYSTEM,1998/99 MANUFACTURE, S/N: J6003-ZA-026A
INPUT: 575 V, 800 AMPS, 60 HZ
OUTPUT: 500 KW, 1456 V, 1000 HZ
1 ONLY 2200 LB TILTER TRANSITE, STEEL SHUNTED. VIEW PHOTO 1, PHOTO 2, PHOTO 3
1 ONLY 1600 LB TILTER TRANSITE.
HYDRAULIC POWER PACK,
COOLANT SYSTEM C/W 1 PUMP, PHOTO 2
AND 2 COOLERS, VIEW DE-IONISER
FULL PIPING DISTRIBUTION SYSTEM FOR CONTROL COOLING, 2 X 6 FANS RADIATOR WATER COOLER, INSIDE, OUTSIDE
HEAT EXCHANGER FROM CITY PUMPS, 460V
W/TRANSFORMER AND CONTROLS, PHOTO 1 ,
VIEW: OPEN PANEL, INSIDE VIEW, PHOTO1
BUSBAR AND STEEL FURNACE DECK
ELECTRIC FURNACE SELECTOR SWITCH, OPEN, PHOT0 1, PHOTO 2,
SPARES INCLUDES: CAPACITORS, SCR'S, DIODES, DC BOARD, LEADS |
More Information |
|
(XG1001
XG1002) |
ABB (BROWN BOVERI) TWO 6 TON 2500 kW MEDIUM FREQUENCY MELTING UNIT , FURNACE TYPE: ITM-5P/2500, CRUCIBLE CAPACITY(2): 12,000LBS, MELT RATE: 5.6 TON/Hr, FURNACE BODY MAXIMUM TILT 95° ANGLE w/ Venetta scrap preheater, weigh scale charge bucket, 48" crane magnet, electric hot metal transfer car, Bohn water to air heat exchanger, Allen Bradley demand controller updated in 1992 and Carborundum dust collector
NOTE: ONE POWER SUPPLY FOR BOTH FURNACES, CAN RUN ONE AT A TIE OR BOTH AT SAME TIME. |
More Information |
|
| (AB5108-1) |
AJAX MOTOR GENERATOR
FOR INDUCTION FURNACE
PART NO. T-88016-1
S/N: 32418 PHOTO
100 Kw, 1 PHASE, CYCLE 3000
MOTOR: 440 V, 3 PHASE, 60 CYCLE, 3560 RPM
CHOICE ON VOLTAGE, 400 V, 250 Hp
OR 800 V, 125 Hp
WATER GPM14
|
More Information |
|
| (X2E1667) |
AJAX CORELESS INDUCTION FURNACE
3 INDUCTION FURNACES
W/STAND ALONE MODULE LINK
TO MAIN POWER UNIT , CONTROLS
S/N: J-1273-F, CAPACITY: 8,000LBS EACH,
1000KW, 1000 CYCLE,
MORE SPECIFICATIONS SOLD |
More Information |
|
| (XW02133) |
NEW ADDITION AJAX INDUCTION HOLDING FURNACE
FOR COPPER, BRASS OR ALUMINUM
CAPACITY: 8 TON, 450 KW
VERTICAL CHANNEL TYPE, AIR COOLED
COMPLETE, NEW INDUCTOR & LINING KIT TO RE-START
VIEW: CONTROL
|
More Information |
|
| (XWO1895) |
AJAX INDUCTION MELTING SYSTEM SOLD
MODEL: 1150-4, S/N MK-67080E
250KW, 1000HZ CONTROL PANEL, INSIDE
NEW: 1980
PHASOR TYPE-SOLID STATE
(1) 1,000 LBS HYDRAULIC TILT FURNACE
(1) 500 LBS HYDRAULIC TILT FURNACE
W/ HYDRAULIC PUMP
W/ CABLES & LEADS
W/ WATER PUMP
USED FOR MELTING BRONZE |
More Information |
|
| (A5909) |
AJAX INDUCTION FURNACE
TRANSITE B; 22 X 22 X 24 IN; S/N 920118 |
More Information |
|
(A1839-
A1840-
A1841) |
ALUMINIUM NATURAL GAS FURNACE
3 COMPLETE SYSTEM AVAILABLE SOLD
CAPACITY: 300 LBS
PROGRAMMABLE, AUTOMATIC CONTROL W/THERMO-COUPLE
EXTRA PARTS & CRUISIBLE
WAS RUNNING IN QUEBEC CANADA
GAS SYSTEM APPROUVED FOR QUEBEC
VIEW: BLOWER, PHOTO 2 & CONTROLS
|
More Information |
|
| (AW1101) |
BBC FURNACE
CAPACITY: 1,000 LBS, USED
W/LINER FOR CAST IRON/BRASS
300 KW 3,000 Hz, 480 VOLTS,
WITH ITM SPECIAL POWER SUPPLY
AND HYDRAULICS, NO-COOLING |
More Information |
|
| (XR1918) |
BBC BROWN BOVERI FURNACE SOLD
MODEL: ITM-2000, S/N: 12240-06-1
1000 HZ, 750 KW, 2400 V, YEAR 1982
2 FURNACES OF 2000LBS, VERY LITTLE USE
COMPLETE W/ COOLING TOWER, HYDRAULICS,
POWER LEEDS, CONTROLS VIEW NAME PLATE |
More Information |
|
| (AB1820) |
BROWN BOVERI MELTING FURNACE
S/N: 62S1898A PHOTO
MOTOR GENERATOR TYPE, 100 LB IRON
50 Kw, 3 000 Hz
VIEW POWER SUPPLY: FRONT, BACK, INSIDE |
More Information |
|
| (AB0004) |
DETROIT ROCKING ARC FURNACE SOLD
MODEL:CMS, S/N: 1179K; 300 LBS & 700LBS,
CAPACITY: 60 LBS SERIE, YEAR 1966 |
More Information |
|
| (AB0003) |
DETROIT ROCKING ARC FURNACE SOLD
MODEL:LFC, S/N: 1402K; HORIZONTAL,
CAP:350 LBS serie, 125 KW, 440V, 60Hz |
More Information |
|
| (AB0002) |
DETROIT ROCKING ARC FURNACE SOLD
MODEL:LFYP, S/N: 1415K; HORIZONTAL,
CAP:700 LBS serie, 175 KW, 440V, 60Hz
DIM.: SHELL SIZE:48IN DIA. X36IN LONG,
OVERALL HEIGHT:5FT |
More Information |
|
| |
DETROIT ROCKING ARC FURNACE SPARE ELECTRODES FOR(AB0002) (AB0003) SOLD |
More Information |
|
| (BRD8733) |
NEW ADDITION DYNARAD 750# ELECTRIC RESISTANCE MELTING FURANCE WITH LID AND CONTROLS AND WATLO ELEMENTS PHOTO
Manufacturer: DYNARAD
Location: GRAFTON, OH
|
More Information |
|
| (BRD8759) |
DYNARAD FURNACE MODEL EC2400 2400# DIP OUT TYPE ELECTRIC RESISTANCE S/N 878 WITH 96 KW POWER SUPPLY AND CONTROLS
Manufacturer: DYNARAD,
Model: EC2400
Serial Number:
878,
Location: GRAFTON, OH SOLD |
More Information |
|
| (BRD8760) |
NEW ADDITION DYNARAD FURNACE MODEL EC1500 1500# DIP OUT TYPE ELECTRIC RESISTANCE WITH 84 KW POWER SUPPLY AND CONTROLS
Manufacturer: DYNARAD
Model: EC1500
Location: GRAFTON, OH PHOTO |
More Information |
|
| (BRD8614) |
NEW ADDITION DYNARAD MODEL MT-260-MG
400 TO 600# HYDRAULIC TILTING RESISTANCE ELECTRIC FURNACE S/N 802 WITH HYDRAULIC UNIT AND CONTROLS $12,500 |
More Information |
|
| (BRD8742) |
NEW ADDITION FRANK W. SCHAFFER FURNACE
MODEL K-1966
S/N 2562 400KVA GLO-BAR 480 VOLTS INPUT OUTPUT 105 - 350 VOLTS
Manufacturer: FRANK W. SCHAFFER
Serial Number:
K-2562
Location: GRAFTON, OH PHOTO
|
More Information |
|
| (AB0001) |
FISHER GAS FURNACE SOLD
(no controls & no gas range)
MODEL:MNP, S/N: 2285, 1400 LBS(bronze)
450 LBS(aluminium)
TOP VIEW, BLOWER, AIR & GAS MIXER |
More Information |
|
| (AB1121) |
FURNACE LEADS - SPARE-PARTS 750 KW |
More Information |
|
| (XC1-1533) |
GASMAC GAS FURNACE SOLD
FOR ALUMINIUM, NATURAL GAZ BURNER
400,000 BTU, CAPACITY:400 LBS, PHOTO
INCLUDED:HOOD,JIB, THERMOCOUPLE,
DEGASING UNIT |
More Information |
|
| (XDC1327) |
GAS UNIT SOLD
Hot Works Furnace
Natural Gas Fired
Barber Coleman temperature controller
Two Maxtron shut-off valves, 100 psi each
Cinncinati Fan, Model HP4C20, 5 hp,
208/230/460 voltage
Allen Bradley Controls |
More Information |
|
| (ACA1128) |
GAS TILTING CRUSABLE FURNACE
Capacity: 500lbs
View: BLOWER |
More Information |
|
| (AME0704) |
GAS TILTING FURNACE CAP: 500 LBS; 575V |
More Information |
|
| (A0189) |
INDUCTION FURNACE COIL
10,5'' DIA. X 12'' H |
More Information |
|
(CA0794)
(CA1118) |
GASMAC ELECTRIC RESISTANCE FURNACE
MODEL:LM570, 575 V, 53 KW, 560 LBS |
More Information |
|
| (BRD8225) |
INDUCTOTHERM POWER-MELT FURNACE
VIP 1500-2-R, 1500 KW, 300 HZ, MFG. 1990
WITH 8000 LB. SHELL,
HYDRAULIC TILT AND COOLING
GE TRANSFORMER SOLD jh |
More Information |
|
(A2121)
(A2122) |
NEW ADDITION INDUCTOTHERM DURALINE CORELESS BOX FURNACE
W/CONTROL, HYDRAULIC VALVE, 2 AVAILABLE
FOR AL OR BRONZE PHOTO
CAP.: 750 LB, 350 KW, 3,000 HZ
THESE FURNACES WHERE HOOKED UP TO A 350 KW, 3,000 HZ POWER SUPPLY (NOT AVAILABLE) |
More Information |
|
| (XWO2132) |
INDUCTOTHERM INDUCTION FURNACE
YEAR 1995, VIP POWER TRAK SOLD
500 KW, 1200 HZ, 1500 LB. TILTING BOX FURNACE,
WATER PUMPS AND CONTROLS |
More Information |
|
| (AB5613) |
INDUCTOTHERM INDUCTION FURNACE
MODEL: 40-96, S/N: 75080
CAPACITY: 40KW VIP, 440V,
W/POWER SUPPLY ONLY: POWER TRACK 96-13
PHOTO 1, PHOTO 2, PHOTO 3,
|
More Information |
|
| (XWO1654) |
INDUCTOTHERM INDUCTION MELTING SYSTEM FOR ALUMINUM MANUFACTURED NEW 1993 SOLD
MODEL VIP POWER TRAK 550-2R
MELTING RATE FOR SYSTEM IN ALUMINUM IS 2 TONS PER EVERY 45 MINUTES
1 POWER SUPPLIE, 550 KW, 200 HZ
1 TON ALUMINUM CAPACITY STEEL SHELL FURNACES, WITH LIDS AND TILTING CONTROLS, 1 SET OF WATER COOLED POWER CABLES, CLOSED TYPE WATER COOLING SYSTEM WITH (2) LIEBERT COOLING TOWERS, HYDRAULIC PUMP, INDUCTOTHERM COOLING CONTROL PANEL, HYDRAULIC LINING, PUSH OUT MECHANISM, INCLUDES: BUS BAR, WATER PUMPS, WATER PANEL, AND ALL AVAILABLE BOOKS AND MANUALS SPARE PARTS
|
More Information |
|
| (X1Y1686) |
INDUCTOTHERM INDUCTION MELT SYSTEM MODEL: VIP POWER TRAK 250-10 POWER SUPPLY NEW 1987 250KW, 1000 HZ, SOLD
CONTROL 1, CONTROL 2,
1000 LB BOX FURNACE WITH POWER CABLES
VIEW POT
1- BOHN WATER COOLING TOWER (NEW 2001)
CLOSED DRY TYPE WITH LEGS
ALL RELATED ACCESSORIES, BOOKS AND DRAWINGS SOLD |
More Information |
|
| (XAB1731) |
INDUCTOTHERM AUTO POUR SOLD
PRESSURE POUR TYPE, 6500 LBS. POURABLE CAPACITY, 100 KW INDUCTOTHERM INDUCTOR, 480V/3/60, BOTTOM MOUNTED
INDUCTOTHERM DIRECT PRESSURE POUR CONTROL CONSOLE WITH PLC
AND PANEL-VIEW, LIQUIMETRICS VESSEL,
66" DIAMETER PNEUMATIC CONTROL CABINET PHOTO,
COMPLETE SYSTEM RECENTLY REMOVED
WITH BOOKS AND DRAWING -A,
DRAWING -B
|
More Information |
|
| (XAB1732) |
INDUCTOTHERM AUTO POUR SOLD
4000 LB. POURABLE CAPACITY
100 KW INDUCTOTHERM INDUCTOR
COMPLETE AS REMOVED FROM OPERATION
PHOTO 1, PHOTO 2, PHOTO 3,
VIEW: CONTROL, MANUALS & PRINTS |
More Information |
|
| (AB3513) |
INDUCTOTHERM POWER SUPPLY
FOR AN INDUCTION FURNACE
MODEL: 350, S/N: 76-28280
100 Kw, 120 MAX.,
VIPMARK IV
INSIDE VIEW: PHOTO 1, PHOTO 2 , |
More Information |
|
| (X4G2226) |
NEW ADDITION INDUCTOTHERM PRESSURE POUR FURNACE
S/N: 011-143327-217-11 PHOTO
8 TON USABLE,
INPUT:3 PHASE, 60 HZ, 562 KVA, 460 v, 705 AMPS,
OUTPUT: 500 KW, 2000 V, 1700 AMPS, 70 HZ
COMPLETE W/ BASE & CONTROLS PHOTO
WATER REQUIREMENTS |
More Information |
|
| (XAB1733) |
INDUCTOTHERM "VISI-POUR" AUTOMATIC POURING FURNACE SOLD
VIP POWER TRAK 250 KW,
1000 HZ POWER SUPPLY COMPUTER CONSOLE WITH MELT MINDER, 5500 LB CORELESS FURNACE WITH STOPPER ROD SYSTEM, BOTTOM POUR VISI CAMERA, MANY ACCESSORIES
(LINING FORMS, STOPPER RODS, ETC….)
ALL BOOKS AND DRAWINGS, LIKE NEW CONDITION, NEW 1996
DRAWING: MOLD LINE, SIDE VIEW,
TOP LAYOUT SOLD
|
More Information |
|
| (X3W2078) |
KEMP GAS FIRED ALUMINUM
RE-MELT FURNACE
MODEL: YEAR 1980 PHOTO
S/N: 410190, 8000LB CAPACITY
W/ HINGED COVER, AIR OPERATED ACTUATING CYLINDERS, SPENCER 7.5HP TURBINE BLOWER,
PUSH BUTTON CONTROL PANEL,
5 HP HYDRAULIC POWER SUPPLY |
More Information |
|
| (A0660) |
KOZMA MORGAN GAS FURNACE MODEL: C 300,
S/N 74-253, 750 000BTU, 600LBS/HRS
CAPACITY: 2400LBS, W/ BLOWER 3HP,550V,
W/ AJUSTABLE FRONT SLAG DOOR,
PNEUMATIC CHARGING DOOR,: 30" X 12",
WELL SIZE: 32 IN X 60 IN X15 IN,
BURNER: ECLIPSE; CATEGORY:104-C |
More Information |
|
| (A0661) |
KOZMA MORGAN GAS FURNACE MODEL: C 300,
S/N A74191, 750 000BTU, 1400 F, 600
LBS/HRS, YEAR :1974, CAPACITY: 2400LBS,
W/ BLOWER 3HP,550V,
W/ AJUSTABLE FRONT SLAG DOOR,
PNEUMATIC CHARGING DOOR,: 30" X 12",
WELL SIZE: 32 IN X 60 IN X15 IN,
BURNER: ECLIPSE; CATEGORY:104-C |
More Information |
|
| (A0096) |
LUCIFER ZINC FURNACE
MODEL:T-2055-1224, S/N: 4418,
230 V, 1000 F,YEAR:1995
|
More Information |
|
| (XR1631) (XR1632) |
MONOMETER ROTARY FURNACES SOLD
(2 AVAILABLE) PHOTO
CAPACITY : 20 TONS OF GRAY IRON EACH
DIAMETER: 108 INCH, LENGTH : 270 INCH
BLOWER: 50 HP MOTOR, 220/440, 3540 RPM,
GEAR BOX TO CONTROL THE ROTATORY
MOVEMENTS ARE DAVID BROWN RADICOM,
RATIO: 19/1 , MADE IN ENGLAND
DIESEL PUMP: REAVELL (20 PSIG)
WITH THE HOIST TO LIFT THE MAIN BODY.
COMPLETE, BRAND NEW, NEVER USED.
SEE BASE
|
More Information |
|
| (A2003) |
NOLAN REMELTER LEAD OVEN
S/N: 9261L
550V, 18 KW, 19 AMP
1 TON CAPACITY, PHOTO
W/TEMPERATURE CONTROL
W/DRAIN PIPE |
More Information |
|
| (BRD8729) |
NEW ADDITION OSI MESH BELT CORE OVEN 36" X APPROX. 50' MESH BELT, GAS FIRED, 1.2MILLION BTU/HR, 19' INLET, 19' OUTLET, 21' OVEN, 12" CLEARANCE, WITH BLOWER, PURGE, VARIABLE SPEED BELT, ALLEN BRADLEY 1302 SOLID STATE CONTROL , 575 VOLTS MORE |
More Information |
|
| (XP0714) |
PARK THERMAL HEAT TREAT ELECTRIC OVEN
240V, 2000F, W/HONEYWELL CHART RECORDER & OMRON CONTROLLER, DIM.:42 IN DEEP,
28 IN.WIDE, 24 IN. HIGH |
More Information |
|
| (XWO1948) |
PILLAR INDUCTION FURNACE, MARK 8,
REMANUFACTURED BY PILLAR ~1996
250 KW, 1200 HZ, 1000 LB. HYDRAULIC FURNACE, SOLD
WITH CABLES & BUS, HYDRAULIC PUMP
VIEW: CONTROL, OPEN 1, OPEN 2 |
More Information |
|
| (XP0724) |
PILLAR COMPLETE ELECTRIC FURNACE
200KW PANEL AND 500 LBS BOX;
VERY LOW HOURS; 575V |
More Information |
|
| (A1124) |
PILLAR LIFT SWING FURNACE
MODEL: AB4174-20, S/N: S.O.7-32716NV,
#90 CRUCIBLE 90 LBS ALUMINUM, 270 LBS BRONZE, 105 KW, 3000 HZ,
460 V OR 575VOLTS W/TRANSFER,
COOLING TOWER: PHOTO1 PHOTO2
CONTROL: PHOTO1
OPEN CONTROL PANEL : PHOTO 1
COOLING PUMPS: PHOTO
TRANSITE BOX: PHOTO |
More Information |
|
| (A1494) |
PIRADIA REFRACTORY DRYING ELEMENT
FOR 9 TON OVEN PHOTO |
More Information |
|
| (1ZZ1854) |
STAHL ALUMINUM FURNACE (LINED) SOLD
DATE: 5-4-99, MODEL: 3000 DDRMV
S/N:99478,460v,7,38 AMPS, OD:14' X 9' X 12'H
MAXON BLOWER 5HP, 460V
HOLDING CAPACITY: 3,000 TON
MELTING CAPACITY: 1,000 TON/HR
VIEW: CONTROL PANEL,
OPENED CONTROL PANEL, PLC CONTROL
3 OTHERS AVAILABLE
(1ZZ1891) S/N:99477, (1ZZ1892) S/N:99476
(1ZZ1855) IS NOT LINED PHOTO1, PHOTO2,
|
More Information |
|
| (X1Y2211) |
NEW ADDITION THERMTRONIX FURNACE
MODEL: SF-2300
S/N: 951292,
480/240 V, 125 Kw,
150/300 AMPS, CONTROL
CAPACITY: 2 300 LBS, INSIDE VIEW |
More Information |
 |
(AB1843)
(AB1844)
(AB1845) |
TRANSFORMER, PHASE BALANCING REACTOR (3 AVAILABLE) HUNTER DON
(1)200 KVAR, (2)600 KVAR PHOTO PHOTO
|
More Information |
 |
| (BRD8228) |
10 TON ARC FURNACE
PITTSBURGH LECTROMELT BY GE
10' DIAMETER, TRANSFORMER SR.# 6460895 60 CYCLE, 3 PHASE, TYPE: WCT, 11000 HV, 186 PM, 1700 GAL. OIL RECENT REBUILD jh |
More Information |
|
| (BRD8654) |
2000 UNIQUE/PERENY PROMELT SOLD
MODEL PM 1600 1600# RESISTANCE TYPE MELTING FURNACE HOIST TILTING TYPE WITH CONTROLS, 660# PER HOUR MELT RATE
$17,500 jh-fls |
More Information |
|
| (AB5556) |
UPTON GAS FIRED POT FURNACE
FOR SALT BATH HEAT TREATING
MODEL: UG 2427, PHOTO
DIM.: 52'' DIAM. X 46'' H.
APPROX. PRODUCTION: 175-220 LB/HOUR
SEE FEATURES
BLOWER: 460 V, 1,5 HP
DIM.: 26'' DIAM. X 2-3/8'', EXIT 2,75''
CONTROL: S/N: UPG2427, PHOTO
|
More Information |
|
| (A0795) |
ZINC GAS FURNACE
MODEL:5000 LBS W/HOOD |
More Information |
|
| (A0155) |
DSP WAX MELTER
MODEL: VR1, 240W, 110V
DIM.: INTERIOR 4'' DIA, 4'' DEEP |
More Information |
|
|
|
|
Updated
July 8, 2008
This site is Copyrighted 1997-2008 by BRADFORD EQUIPMENT INC. All Rights Reserved.
No part of this site may be copied or reproduced without the expressed written consent of BRADFORD EQUIPMENT INC. |
|
){kind=link}
){kind=link}